2009 Nissan GT-R R35 Black Edition JM1300
2009 Nissan GT-R R35 Black Edition JM1300
The Nissan GT-R established itself as one of the defining performance cars of its generation, combining formidable pace with sophisticated four-wheel-drive technology and remarkable everyday usability. This example, however, has been developed far beyond factory specification. The subject of an extensive programme of engine, transmission, chassis and aerodynamic upgrades, its accompanying history file contains invoices exceeding £60,000, while the vendor advises that total investment comfortably surpasses £100,000 when the principal engine and transmission builds, specialist labour and supporting modifications are considered.
Central to the transformation is a JM Imports Signature Specification VR38DETT engine. Built around a fully balanced rotating assembly, it incorporates CP forged pistons, Carrillo connecting rods, a billet crankshaft, CNC-ported cylinder heads, JUN camshafts, uprated valve gear, ACL Race bearings and ARP fasteners. Further upgrades include HKS timing components, a Tomei oil pump, revised cooling, forged oil-control baffle and Boost Logic catch tank. The specification is understood to have been engineered to support outputs exceeding 1,500 bhp. Forced induction is courtesy of a Greddy TD06HR-25G turbocharger package incorporating BorgWarner billet compressor wheels. An HKS 12-injector inlet manifold, Injector Dynamics ID1700 injectors, Fore Innovations triple-pump fuel system, enlarged Greddy induction system and substantial intercooler arrangement provide the necessary supporting hardware. Exhaust gases are handled by a 102-mm GTC titanium system, while a Syvecs S6+ standalone ECU provides engine management, complemented by a Toucan display and flex-fuel capability. The transmission has received similarly comprehensive attention, incorporating an Albins first-to-sixth gearset and output shafts, Xtreme 18-plate clutch, Dodson components, upgraded differential bracing, 8,000-rpm TCM upgrade and Race Junky transmission software. The vendor advises that the engine build has covered approximately 6,000 to 7,000 miles.
Chassis enhancements comprise H&suspension, 396-mm brake discs with Pagid RS29 pads, and lightweight Advan Racing magnesium wheels wearing Michelin Pilot Sport Cup 2 tyres. A 2017-specification front-end conversion, LED rear lights and extensive carbon-fibre additions—including an Xtreme splitter, Zele side skirts, fender vents, rear valance and Difflow diffuser—further distinguish the car, which is presently finished in a professional wrap applied by MSL Customs. According to the vendor, the GT-R currently produces approximately 1,070 bhp on Shell V-Power, with up to 1,300 bhp available on race fuel. Owner-supplied figures include a 9.4-second quarter-mile at approximately 160 mph and a 100-200 km/h time of around 3.5 seconds.
The substantial history file includes invoices, dyno records, service history and build documentation, with approximately £10,000 of recent expenditure at JM Imports and Race Junky Performance. A remap was completed approximately 2,000 miles ago. Documentation also records replacement of the speedometer head under warranty on 12 November 2012 at 24,304 miles. With the replacement unit displaying 18,327 miles at the time of cataloguing, total mileage is calculated at 42,950 miles. Representing an opportunity to acquire a comprehensively developed GT-R at a fraction of the likely cost of replicating its specification, this formidable example warrants close inspection. Consigned by Will Penrose
Below is the complete, detailed specification sheet and performance breakdown:
Proven Performance &Capabilities Engineered with hardware capable of supporting in excess of 1,500 BHP, the car runs a standalone Syvecs management system with flex-fuel capability, currently set up on dual maps for peak reliability:
• Shell V-Power 99 (Pump Fuel): 1,070 BHP
• Race Fuel / High-Octane Blend: 1,300 BHP
Verified Performance Metrics:
• 1/4 Mile: 9.4 seconds @ ~160 mph
• 100-200 km/h: ~3.5 seconds
Engine &Long-Block Specification (JM Forged VR38)
• Short Block &Assembly: JM Imports Signature Spec VR38DETT with a fully balanced rotating assembly, billet crankshaft, CP forged pistons, Carrillo connecting rods, ACL Race bearings, ARP fasteners throughout, and a forged oil control baffle.
• Cylinder Heads &Valvetrain: CNC-ported big-valve race heads, JUN 264 camshafts (IN/EX), and uprated valve gear.
• Oil &Hardware: Tomei oil pump, HKS timing components, and a Boost Logic oil catch tank.
• Engine Mileage: The complete engine build has covered approximately 6,000 to 7,000 miles since completion.
Forced Induction, Fuel &Exhaust
• Turbochargers: GReddy TD06HR-25G turbocharger package equipped with upgraded BorgWarner billet compressor wheels (SPE enlarged configuration).
• Fueling: HKS 12-injector inlet manifold, Injector Dynamics ID1700 injectors, Fore Innovations triple-pump fuel system (dual/triple 400LPH setup with heavy-duty wiring), and an adjustable Fuel Pressure Regulator.
• Intake &Cooling: GReddy enlarged twin-intake system, large-capacity SRD front-mount intercooler, HKS BOVs with hard pipe kit, Forge cooler tank, and silicone hose kit.
• Exhaust System: GReddy ceramic-coated downpipes flowing into a GTC titanium Y-pipe and a massive 102mm (4") GTC titanium exhaust.
Drivetrain, Suspension &Brakes
• Transmission: Strengthened GR6 gearbox featuring an Albins 1st-6th gearset, Albins output shafts, Xtreme 18-plate clutch assembly, Dodson ancillary components, upgraded differential bracing, 8,000 RPM TCM upgrade, Race Junky transmission software, and Willall Racing circlips.
• Braking: Upgraded 396mm / 400mm Alcon floating brake discs clamped with Pagid RS-29 performance pads.
• Suspension: H&lowering springs paired with Bilstein shocks.
• Wheels &Tyres: Lightweight Advan Racing magnesium wheels fitted with high-performance Michelin Pilot Sport Cup 2 tyres (includes original 20" OEM alloys powder-coated in black).
Electronics &Interior
• Engine Management: Syvecs S6+ / S8 standalone ECU featuring switchable Pump/Race maps, flex-fuel capability, launch control, anti-lag, and a dash-mounted Toucan display + 3-Bar STRI boost gauge.
• Interior &Safety: Gold Titan roll cage, while completely retaining everyday street usability—full OEM interior, electric seats, and ice-cold Air Conditioning are retained.
• Security: Ghost Immobiliser system installed.
Exterior &Body Styling
• Conversion &Aero: Full 2017-specification front-end conversion with updated LED rear lights.
• Carbon Fiber Package: Xtreme carbon fiber front splitter, Zele carbon side skirts, carbon fender vents, rear valance, and a Difflow rear diffuser.
• Finish: Finished in a professional custom wrap applied by MSL Customs.
History &Provenance
• History File: Accompanied by a comprehensive folder of invoices, dyno sheets, service history, and full build documentation.
• Recent Maintenance: Includes approximately £10,000 in recent expenditure with JM Imports and Race Junky Performance, including a complete recalibration/remap completed approximately 2,000 miles ago”.
Lot details
Year: 2009
Make: Nissan
Model: GT-R R35 Black Edition JM1300
Registration: MT09 DKJ
Chassis No: N1GANR35U0100982
Odometer: 42,950
* Fully rebuilt with over £100,000 invested
* 1,070 bhp on pump fuel and 1,300 bhp on race fuel
¡Deje que expertos inspeccionen este vehículo!
Cargando…
Cargando…
Cargando…
Cargando…
Cargando…
Cargando…
Cargando…
Cargando…
Newsletter
Reciba selecciones cuidadosamente escogidas de los coches, motocicletas y anuncios de subastas más interesantes de Classic Trader, directamente en su bandeja de entrada.
