1993 | Porsche 911 Carrera 2

**Manufaktur 964 Carrera 2 Targa **

**Manufaktur 964 GmbH is a passion-driven company dedicated to the restoration and maintenance of the Porsche 964. ******

Our focus is not the trade in automobiles, but this is due to the large number of customers we have been able to make happy over the years. Of course we stand by our product and our work. We are then happy to help our customers to market the vehicles we have created, if desired.****

We have either completely restored all vehicles that we offer as a "full project", repaired them in a "rolling restoration" according to our standards or have looked after them for many years.****

**Everything we offer must meet our quality standards! ******

This is sometimes a bit exaggerated, but for us the quality of our work is the focus of our work.****

**More information about us, our philosophy and our work can be found under the link to our website:

****** www.Manufaktur964.de********

**or on our Youtube channel under the link:

****** https://www.youtube.com/channel/UCvICMZMSjyVrWWzXGaPHWXQ****

But now specifically to the vehicle on offer:

This is a "rolling restoration" from the years 2020 - 2021 Porsche 964 Carrera 2 Targa model year 1993

The base vehicle was purchased by us in 2020 with a mileage of 110,000 km and then extensively restored.

The vehicle was delivered from the factory with the following options:

Exterior color: L 741 black

Interior: UD full leather black

Country code: C00 Germany

139 LEFT SEAT HEATING, ADJUSTABLE

231 CHANGE OF TIRE BRAND DURING A PRODUCTION PERIOD

327 RADIO "SYMPHONY RDS"

340 RIGHT SEAT HEATING, ADJUSTABLE

403 CAST ALLOY WHEELS (CUP DESIGN) 7JX17 205/50 ZR17; 8JX17 255/40ZR17

567 WINDSHIELD WITH FINISHED UPPER AREA

573 AUTOMATIC AIR CONDITIONING

The following options have been added or changes made as part of the "rolling restoration":

Body: Wheelset Retro Fuchs forged in 8X18 and 10X18

Audio: Blaupunkt Toronto 420 BT with hands-free kit and new speakers

Engine: Factory engine revision package II

As part of the "rolling restoration", the following components were completely revised:

Maintenance 40,000 KM (of course)****

Dry ice blasting****

Repair painting in case of damage to the paintwork**** Lights / Headlights****

Air conditioner and heater****

Fittings***

Gearbox / Drive Revision***

Fuel system****

Oil system****

Engine revision package I***

Engine Revision Package II****

Transmission Revision***

Suspension****

Braking system****

All our 964s are restored according to defined standards.

It starts with checking the incoming status of each vehicle.

This test includes the following work steps:

Thorough cleaning outside and the interior

Visual inspection of the paint

Visual inspection of the body

Visual inspection of the interior

Functional test of all components such as air conditioning/heating, lighting control units, etc. test drive

Visual inspection of chassis / brakes / engine

The second step is dry ice blasting.This includes:

Removal of all underbody panels

Disassembly of the front mask, the rear panel and the sill panels Dismantling of all lighting elements

Dismantle, clean and store all dismantled panels

Drain engine, transmission oil, washing water and brake fluid

Remove engine and transmission

Shipment for dry ice blasting Underbody, front, rear and engine compartment dry ice blasting

After dry ice blasting, the scope of the restoration is determined:

Another visual inspection of the underbody for corrosion and damage

Determination of the scope of the body work

Testing of the chassis components

Checking of all lines (brake, fuel, oil, etc.)

Removal of the oil tank, the oil cooler and all oil lines (lines are generally renewed)

Suspension and brake components are generally overhauled or renewed

Now the preparation of the painting work begins:

Disassembly of the necessary parts for repair painting

Now the individual assemblies are brought to the respective trades:

Body to the body shop / painter Interior for upholstery (seats and panels for refurbishment)

Fittings for overhaul

Depending on the defect, overhaul electronic components

Engine and transmission complete in the factory for revision 1

While the body and interior are in progress, the engine and transmission are being overhauled.

The revision generally includes:

Engine:

Manufaktur 964 revision package I

Pressure loss and visual inspection

Dismantle the engine down to the camshaft housings, clean all parts

Wear parts such as clutches etc. are generally renewed

Renew ancillary units such as starters and generators

Overhaul ignition distributor, replace if necessary

Check attachments for function and replace if necessary

Paint stripping, blasting and powder coating of engine tinplate (damaged parts will be replaced and processed as well)

Re-galvanize all galvanized parts (like original)

Check blasting of exhaust system and replace if necessary

Assemble engine, complete for installation

Manufaktur 964 revision package II

Completely disassemble the engine and clean all parts

Check crankcase, measure, edit if necessary, replace cylinder studs if necessary

Check crankshaft, measure, polish, replace if necessary

Check connecting rods, measure, angle, replace bearings

Check and measure valve train, intermediate shaft, timing chains, etc., replace worn parts camshafts;

Check rocker arm, rocker arm axles, etc., measure, replace if necessary

Cylinder heads generally completely overhaul

Check pistons and cylinders, measure, usually replace

Camshaft housing, chain housing, etc. check, measure, process/replace if necessary

Assemble the crankcase (generally all bearings, seals, etc. are renewed)

Wear parts such as clutches etc. are generally renewed

Renew ancillary units such as starters and generators

Overhaul ignition distributor, replace if necessary Check attachments for function and replace if necessary

Paint stripping, blasting and powder coating of engine tinplate (damaged parts will be replaced and processed as well)

Re-galvanize all galvanized parts (like original)

Check blasting of exhaust system and replace if necessary

Assemble engine, complete for installation

Transmission:

Disassemble after visual inspection for leaks

Check wear parts and replace if necessary

On four-wheel drive vehicles, check the front differential and drive train for leaks and function, replace worn parts or overhaul components if necessary

After completion of the individual trades, assembly follows in

Plant 1 or Plant 2, depending on capacity, in the following work steps:

Install Suspension / Brakes (Either remanufactured or new components)

Assemble the oil cooling system (all lines/hoses new)

Complete the body with new seals and piping (doors, hoods, trim strips, etc.)

Mount lighting Check function

Install a new set of carpets and, if necessary, a new headliner insert discs

Install interior Install engine and gearbox, start-up Mount wheels (rims stripped of paint, powder-coated, new tires)

Measure vehicle (set height, wheel load, track, camber, etc.)

Test drive / checking all functions / quality check Demonstration for acceptance of the main inspection, if necessary, entry of individualizations

Before delivery handover inspection