1994 | Mercedes-Benz E 280 T

We have our reference T-Wagen back on offer. We had this incomparable Mercedes on offer a good six months ago. At the time, we sold it to a high-quality German Mercedes collection. The car has been fully serviced according to the Mercedes service book. It came from Spain and was previously owned by a German pensioner who used it in his holiday home. Accident-free, no repainting, rust-free, no sun damage, simply like NEW! The current second owner registered it in Germany in March 2025 and used it for a holiday trip to the south for around 3,000 km. We have given it a cosmetic overhaul; a major service was carried out at the end of 2024; all functions were checked and all necessary wear parts were replaced. In addition, it received a full TÜV report and a H-approval so that it could obtain classic car status. It came back to us due to family circumstances and is now looking for a new home. An S124 like this, complete with all the owner's manuals, service booklet, keys, and tool kit in mint condition, isn't often found; most have already been worn out as everyday cars.

Optional Equipment:

244 Sport seats, front

281 Leather-trimmed steering wheel and leather gearshift lever in a sporty design (390 mm diameter)

291 Passenger airbag

300 Storage box in the center console

412 Electric sunroof with tilt function

420 4-speed automatic transmission

512 MB Special radio with RDS traffic information receiver

531 Automatic antenna

541 Double roller blind for luggage cover and occupant protection

551 Burglar and theft alarm system

580 Behr air conditioning

583 Electric windows, 2-way front

585, 580 & 583

593 Heat-insulating glass, windshield with band filter, rear window, toughened safety glass

620 Emissions control system

653 Sport suspension with 8-hole alloy wheels

731 Burr walnut wood trim

814 Active bass speaker system

819 CD changer in the trunk

837 Rubber mats

866 Model year 1996

916 Vehicles for hot countries, additional parts

953 Sportline - consisting of a sports suspension, 8-hole alloy wheels, front sports seats, leather-trimmed steering wheel and gearshift lever

Standard equipment:

Driver's airbag

Anti-lock braking system

Heated left and right exterior mirrors with electrical adjustment from the inside

Brake pad wear indicator

Tachometer

Fluid level indicators for oil, water, etc.

Laminated windshield

Belt tensioners for driver and front passenger

Halogen fog lights for front and rear fog lights

Glove compartment lock

Heated rear window with time relay

Separately adjustable heating for driver and front passenger

Child safety locks on the rear doors

Pneumatic headlight range adjustment

Heated windshield washer nozzles

Power steering and safety steering column

Height-adjustable front seat belts

Driver's seat height adjustment

First-aid kit

Warning triangle

Warning buzzer for vehicle lights not switched off

Central locking system

Roof rails

Double roller blind for luggage cover and occupant safety

Electromechanical closing aid on the rear door

Rear seat bench folds down 1/3 to 2/3

Rear window wiper with intermittent and comfort control

Triple rear headrests

Load anchorage

Level control on the rear axle

Work performed:

Remove and install pump package, replace fuel filter, replace supply hose from tank to first pump, replace pressure hose from first pump. Remove and prepare the pump for connecting the second pump, make a new hose end for the second fuel pump and secure it with clamps, and replace the pressure hose from the filter to the supply line.

Tank filter hose to the first pump

7.5mm OE fuel hose

Fuel filter

COH-Line sleeve 1200

Remove the hood insulation mat, remove any adhesive residue, and glue in the new insulation mat.

Insulation mat

Replace the engine and transmission mounts, loosen and secure the fan shroud for centering.

Lemförder engine mount

Lemförder transmission mount

Remove the brake calipers on the rear axle, remove the brake discs, remove the handbrake pads, loosen and remove the handbrake cable from the steering knuckle, remove the rear brake anchor plate, replace the rear ball joints on both sides, reassemble everything, replace the handbrake pads, brake discs, and brake pads.

Lemförder ball joint

RS handbrake pad

Rear axle brake pad set ATE

Brake fluid ATE DOT 4 SL6

Replace brake discs and brake pads on the front axle

Front axle brake discs ATE

Front axle brake pad set ATE

Wear indicator ATE

Replace tailgate damper. To do this, remove and install the left and right side panels in the trunk, remove and install the top panel in the trunk, support the tailgate, and replace the gas pressure cylinder.

Stabilus trunk gas spring

Replace the defective leveling control rod on the rear axle. To do this, remove and install the leveling lever. The ball head of the old rod was riveted to the lever. Drill out and attach the new one with an M6 screw.

Tension rod

Replace brake hoses on the front and rear axles, bleed the brake system

Front axle brake hose ATE

Rear axle brake hose ATE

Presentation for MOT and AU (maintenance and exhaust inspection)

Costs for TÜV SÜD for full inspection & H-certificate/H-license plate

Replace transmission oil cooler hoses

Transmission oil hose

Transmission oil hose

Drain and refill coolant, replace thermostat, replace water hose from cylinder head to water pump, bleed cooling system, warm up the engine

Glysantin OE radiator protection

Thermostat

Replace steering damper

Stabilus steering damper

Perform customer service according to manufacturer's specifications: Change engine oil with filter, change transmission oil with filter, replace air filter, replace spark plugs, replace pollen filter, replace V-ribbed belt, replace wiper blades, and washer nozzles Adjust

Air filter element

Oil filter element

NGK spark plug

Air conditioning service

Mann automatic air filter kit

Motul Synergie 10W40 engine oil

Rear wiper blade

SWF front wiper blade

Mahle pollen filter

Replace rear electric antenna, functional test OK

MB OE replacement telescope

Drain cooling system due to emulsion formation on the top of the reservoir. Replace reservoir. Fill cooling system with water and bleed. Test drive. Emulsion formed again. Remove and install radiator. Replace radiator. Refill cooling system with water. Test drive - system without emulsion. Drain cooling system completely and refill with Glysantin.

Glysantin OE radiator protection

Antenna head replaced

Vehicle cosmetically prepared

1 main key replaced

1 auxiliary key replaced

Rear windshield washer reservoir replaced